1. Lu, T.J., "Ultralight porous metals: from fundamentals to applications," Acta Mechanica Sinica18(5), 457-479, 2002.

2. Ashby, M.F. & Lu, T.J., "Metal foams: a survey" (Invited contribution), Science in China (B)46, 521-532, 2003.

3. 卢天健，何德坪，陈常青，赵长颖，方岱宁，王晓林，“超轻多孔金属材料的多功能特性及应用”，《力学进展》，2006，36（4）：517-535（经中国科学技术信息研究所采用学术计量指标综合评定，该论文荣获2009年度“中国百篇最具影响国内学术论文”）

4. 张钱诚，卢天健，何思渊，何德坪，“闭孔泡沫铝的孔结构控制”（特邀稿件），《西安交通大学学报》，2007，41（3）：255-270。

5. 卢天健，张钱诚，王春野，赵万华，“轻质材料和结构在机床上的应用”（特邀稿件），《力学与实践》，2007，29(6): 1-9.  

6. 张勇明，何思渊，何德坪，卢天健，王辉，黄可，“超轻多孔金属的耐腐蚀性能”，《中国有色金属学报》，2007，17(11): 1808-1813.  

7. 刘桂武，乔冠军，王红洁，金志浩，卢天健，“活化钼-锰法连接高Al₂O₃陶瓷/不锈钢”，《稀有金属材料与工程》，36(5): 920-923, 2007。(SCI indexed) Liu Guiwu , Qiao Guanjun, Wang Hongjie, Jin Zhihao & Lu, T.J., “Joining of high purity Al2O3 to stainless steel by activated molybdenum-manganese process”, RARE METAL MATERIALS AND ENGINEERING  36(5), 920-923, 2007

8.  Xu, S.J., Qiao, G.J., Wang, H.J., Li, D.C. & & Lu, T.J.,“Preparation of mesoporous carbon derived from mixtures of phenol-formaldehyde resin and ethylene glycol”, Mater. Lett.62, 3716-3718, 2008.

9.  Liu, G.W., Qiao, G.J., Wang, H.J., Yang, J.F. & Lu, T.J.,“Pressureless brazing of zirconia to stainless steel with Ag–Cu filler metal and TiH₂ powder”, Journal of the European Ceramic Society 28, 2701-2708, 2008.  

10.  Kammis, S., Gu, S., Lu, T.J.& C. Chen, “Numerical modeling of sequential droplet impingements”, J. Phys. D: Appl. Phys., 41(16): 165303, 2008.

11.  Kammis, S., Gu, S., Lu, T.J. & C. Chen,“Computational simulation of thermally sprayed WC-Co powder”, Comput. Mater. Sci.43(4), 1172-1182, 2008.

12.  Lin, J.P., Qiao, G.J., Jin, H.Y., Guo, Y.J. & Lu, T.J., “Ti/Al2O3 and Ni/Al2O3 laminates prepared by plasma activated sintering (PAS)”, Key Engineering Materials 368-372: 1831-1834, 2008.  

13.  Xu, S.J., Qiao, G.J., Wang, H.J., Li, D.C. & Lu, T.J., “Preparation of aligned silicon carbide whiskers from porous carbon foam by silicon thermal evaporation”, Mater. Lett. 62(30), 4549-4551, 2008.

14. 杨刚宾，刘银娟，乔冠军，高积强，卢天健，“SiC/Si层状陶瓷的裂纹高温自愈合行为”，《稀有金属材料与工程》, 2008, 37（z1）, 623-625；中国高技术陶瓷年会（2007）。

15. 徐顺建，乔冠军，王红洁，李涤尘，卢天健，“酚醛树脂聚合相分离热解制备介孔碳”，《无机材料学报》, 23（5）：971-974，2008。（Xu, S.J., Qiao, G.J., Wang, H.J., Li, D.C. & Lu, T.J., “Preparation of mesoporous carbon by phenol resin polymerization-dependent phase separation and pyrolysis”, J. Inorganic Mater.23, 971-974, 2008.）

16.  Zhang, B., Kim, T. & Lu, T.J., “Analytical solution for solidification in close-celled metal foams”, Int. J. Heat Mass Transfer52, 133-141, 2009.

17.  Zhang, B., Kim, T. & Lu, T.J., “The solidification of two-phase heterogeneous materials: theory versus experiment”, Science in China: E – Tech Sci52(6): 1688-1697, 2009.  

18.  Liu, G.W., Li, W., Qiao, G.J., Wang, H.J., Yang, J.F. & Lu, T.J., “Microstructures and interfacial behavior of zirconia/stainless steel joint prepared by pressureless active brazing”, J Alloys Compounds470 (1-2), 163-167, 2009.  

19.  Xu, S.J., Qiao, G.J., Wang, H.J., Li, D.C. & Lu, T.J.,“Microstructure evolution and reaction mechanism of microporous carbon derived SiC ceramic”, J. Inorganic Mater.24(2), 291-296, 2009.

20.  Zhang, Q.C., Han, Y.J., Chen, C.Q. & Lu, T.J., “Ultralight X-type lattice sandwich structure (I): Concept, fabrication and experimental characterization” (Invited contribution), Science in China: E – Tech Sci52(8), 2147-2154, 2009.

21.  Zhang, Q.C., Chen, A.P., Chen, C.Q. & Lu, T.J., “Ultralight X-type lattice sandwich structure (II): Micromechanics modeling and finite element analysis” (Invited contribution), Science in China: E – Tech Sci, 52(9), 2670-2680, 2009.

22.  Xu, S.J., Li, J., Qiao, G.J., Wang, H.J. & Lu, T.J., “Pore structure control of mesoporous carbon monoliths derived from mixtures of phenolic resin and ethylene glycol”, Carbon 47(8), 2103-2111, 2009.

23.  Xu, S.J., Qiao, G.J., Li, D.C., Yang, H., Liu Y.N. & & Lu, T.J., “Reaction forming of silicon carbide ceramic using phenolic resin derived porous carbon preform”, Journal of the European Ceramic Society 29(11), 2395-2402, 2009.

24. Lu, T.J.& Zhang, Q.C., “Development of lightweight high-performance metals through interdisciplinary efforts” (Invited contribution), Chinese Science Bulletin, 54(20), 3844-3846, 2009.

25.  Liu, G.W., Qiao, G.J., Wang, H.J., Yang, J.F. & Lu, T.J., “Microstructure and strength of zirconia/stainless steel joints prepared by pressureless active brazing”, Journal of Ceramic Processing Research10(4), 567-570, 2009.  

26.  Kammis, S., Gu, S., Lu, T.J. & C. Chen,“Numerical modeling of the bonding mechanism of HVOF sprayed particles”, Comput. Mater. Sci.46(4), 1038-1043, 2009.

27. 张斌，金东范，卢天健，“非均质材料凝固过程分析:理论和实验”，《中国科学》E辑（技术科学），39(2): 206-213, 2009。

28. 徐顺建，乔冠军，王红洁，李涤尘，卢天健，“微孔碳陶瓷化反应机理的研究”，《无机材料学报》, 24（2）：291-296，2009。

29. 张钱城，韩云杰，陈常青，卢天健，“X型点阵结构芯体(I)-概念的提出、材料制备及实验”，《中国科学》E辑（技术科学），39(6), 1039-1046, 2009。

30. 张钱城，陈爱萍，陈常青，卢天健，“X型点阵结构芯体(II)-细观力学建模与结构分析”，《中国科学》E辑（技术科学），39(7), 1216-1227, 2009。

31. 刘伟，卢天健，杨冠军，王飞，卢亚峰，毛小南，杜宇，奚正平, “CT20钛合金管材的冷轧工艺及组织性能的研究 ,”《钛工业进展》，2009, 26(6): 19-22。

32. 刘桂武，杨刚宾，乔冠军，王红洁，王继平，卢天健，“氧化锆陶瓷润湿及钎焊的研究进展”，《稀有金属材料与工程》，2009，38(增刊1): 406-410。(SCI indexed) Liu Guiwu , Yang Gangbing, Qiao Guanjun, Wang Hongjie, Wang Jiping & Lu, T.J., “Research progress on brazing and wetting of zirconia ceramic”, Rare Metal Materials and Engineering  38(1), 406-410, 2010.

33.  Liu, G.W., Li, J., Qiao, G.J., Xu, S.J., Wang, H.J. & Lu, T.J., “Hierarchical macroporous carbon processed with ethylene glycol and starch as double porogens”, Mater. Lett.64, 2696-2699, 2010.  

34. Lu, T.J.& Zhang, Q.C., “Novel strengthening methods for ultralightweight sandwich structures with periodic lattice cores” (Invited contribution), Science in China: E – Tech Sci53(3), 875-877, 2010.

35. 张钱诚，卢天健，闻婷，“轻质高强点阵金属材料的制备及其力学性能强化的研究进展”，《力学进展》，40(2): 157-169, 2010。

36. 刘桂武，乔冠军，卢天健，Valenza F，Muolo ML，Passerone A，“Ni-56Si合金对SiC陶瓷的润湿和铺展”，《硅酸盐学报》，2010, 38(8): 1509-1513。

37. 刘桂武，倪长也，金峰，乔冠军，卢天健, “陶瓷/金属复合装甲抗弹约束效应研究进展”，《西安交通大学学报》，45（3）：1-7，2011。

38.  Liu, G.W., Qiao, G.J., Wang, H.J., Wang, J.P. & Lu, T.J., “Bonding mechanisms and shear properties of alumina ceramic/stainless steel brazed joint”, J. Mater. Eng. Performance20, 1563-1568, 2011.  

39.  Liu, G.W., Ni, C.Y., Xiao, Q.W., Jin, F., Qiao, G.J. & Lu, T.J., “Preparation and Interface Structure of Metal-Encased SiC Composite Armors with Interpenetrating Structure”, Rare Metal Materials and Engineering40(12), 2076-2079, 2011.  

40.  Liu, G.W., Li, J., Qiao, G.J., Xu, S.J., Li, N., Zheng, K.H. & Lu, T.J., “Effect of starting mixture composition on properties and microstructure of hierarchical porous carbon”, Advnaced Mater. Res.327, 130-133, 2011.  

41. Lu, T.J., Zhang, Q.C. & Jin, F., “Recent progress in the development of lightweight porous materials and structures” (Invited contribution), Materials Progress China31(1):13-25, 2012.

42.  Zhang, Q.C. & Lu, T.J., “Experimental and simulated mechanical properties of work-hardened X-type lattice truss structures”, Acta Mechanica Solida Sinica25(2), 111-116, 2012.

43.  Liu, G.W., Wang, Q., Qiao, G.J., Lu, T.J., Li, L. & Wang, J., “Preparation of SiC scaffold reinforced cast iron matrix composite”, Rare Metal Materials and Engineering41(2), 157-160, 2013.  

44. 袁振圣，赵宏达，陈振茂，慈军，卢天健，耿丽, “胶结波纹夹芯板水浸超声相控阵检测”，《应用力学学报》31(3)，370-374, 2014年

45.  Quan, C., Han, B., Hou, Z., Zhang, Q., Tian, X. & Lu, T.J., “3d printed continuous fiber reinforced composite auxetic honeycomb structures”, Composites Part B: Engineering. 187, 107858, 2020.

46.  Zhao, Z.-N., Han, B., Li, F.-H., Zhang, R., Su, P.-B., Yang, M., Zhang, Q., Zhang, Q.-C. & Lu, T.J., “Enhanced bi-layer mosaic armor: experiments and simulation”, Ceramics International. 46, 23854–23866, 2020.

47.  Zhu, H., Yang, H., Ma, Y., Lu, T.J., Xu, F., Genin, G.M. & Lin, M., “Spatiotemporally Controlled Photoresponsive Hydrogels: Design and Predictive Modeling from Processing through Application”, Advanced Functional Materials. 30, 2000639, 2020.

下一页：本构关系