高金翎，博士，特聘研究员
南京航空航天大学航空学院
电子邮箱：Gaojl93@outlook.com
地址：江苏省南京市秦淮区御道街29号
基本情况
高金翎，男，1993年7月生，安徽凤阳人，博士，特聘研究员，“多功能轻量化材料与结构”工信部重点实验室骨干教师，2021年8月毕业于美国普渡大学航空与航天学院，获工程学院优秀研究生科研奖。2022年4月入职南京航空航天大学航空学院。主要研究方向为实验力学、冲击动力学、复合材料力学、核反应堆结构力学、双模量材料本构模型及数值计算方法等。研究多次被International Journal of Impact Engineering、Composites Science and Technology等力学、复合材料领域中科院一区Top刊物报道，参编著作两部。博士期间作为主要参与者参加美国士兵执行计划办公室资助项目、美国陆军研究实验室资助项目，美国阿贡国家实验室资助项目，研究成果被美国陆军实验室材料极端动态响应中心评为2020年度研究热点，获2020年度青年研究员。在国际会议上做口头报告10余次，为国际实验力学协会、美国复合材料协会、美国航空与航天协会成员，国际实验力学大会“复合材料的动态行为”分会场长期组织者，International Journal of Solids and Structures、Composites Part B等力学、复合材料领域10余本顶级/知名国际期刊审稿经历。
2022年4月起本人依托“多功能轻量化材料与结构工信部重点实验室”研究平台开展科学研究，因材施教，努力为学生营造专业的成长环境，培养具有国际化视野的科研人员，同时鼓励将科学研究产业化，利用科研特长攻克“卡脖子”技术，支持创业、就业。
研究方向
材料力学行为表征与测试新方法
特种纤维的极端动态力学响应
先进复合材料多尺度动态力学行为研究
核反应堆结构力学
双模量材料本构模型及数值计算方法
工作经历
2022年4月起 南京航空航天大学，航空学院 特聘研究员
2021年8月-2022年2月 美国普渡大学，航空与航天学院 博士后研究员
教育经历
2017年7月-2021年8月 美国普渡大学，航空与航天学院 博士
2014年9月-2016年6月 上海大学，土木工程系 硕士
2010年9月-2014年6月 上海大学，土木工程系 学士
代表性论文
[1] J. Gao, Z. Guo, J. Hernandez, F. Zhou, Y. Nie, J. Gao, B.H. Lim, N. Kedir, X. Zhai, J. Wang, J.T. Tsai, F. De Carlo, P.D. Shevchenko, T.N., Tallman, M.B. Guk Jun, G.R. Palmese, W. Chen* (2021). Transverse impact by RCCs on S-Glass and Kevlar® FRC strips, Composites Part A: Applied Science and Manufacturing, 146, 106425.
[2] J. Gao, N. Kedir, C. Kirk, J. Hernandez, J. Wang, S. Paulson, X. Zhai, T. Horn, G. Kim, J. Gao, K. Fezzaa, F. De Carlo, P. Shevchenko, T.N. Tallman, R. Sterkenburg, G.R. Palmese, W. Chen* (2021). Real-time damage characterization for GFRCs using high-speed synchrotron X-ray phase contrast imaging, Composites Part B: Engineering, 207, 108565.
[3] J. Gao, C. Kirk, N. Kedir, S. Paulson, J. Hernandez, J. Gao, X. Zhai, J. Wang, T. Horn, G. Kim, F. De Carlo, P. Shevchenko, T.N. Tallman, G.R. Palmese, R. Sterkenburg, W. Chen* (2021). A method for characterization of multiple dynamic constitutive parameters of FRCs, Composites Science and Technology, 203, 108607.
[4] J. Gao, B.H. Lim, X. Zhai, Y. Nie, N. Kedir, W. Chen* (2020). Failure behaviors of single high-performance fibers under transverse dynamic cut, International Journal of Impact Engineering, 144, 103660.
[5] J. Gao, W. Yao*, J. Liu (2017). Temperature stress analysis for bi-modulus beam placed on Winkler foundation, Applied Mathematics and Mechanics-English Edition, 38(7): 921-934.
期刊论文列表
[31] M. Sannamani, J. Gao, W. Chen, T.N. Tallman* (2021). Damage detection in non-planar carbon fiber-reinforced polymer laminates via electrical impedance tomography with surface-mounted electrodes and directional sensitivity matrices,under review.
[30] J.A. Copley*, B Ellyson, J. Klemm-Toole, J. Gao, N. Kedir, C. Kirk, W. Chen, N. Parab, T. Sun, K. Fezzaa, K. Clarke, A. J. Clarke (2021). HiSPoD as a preparatory tool for improving design of high-rate, time-resolved synchrotron x-ray diffraction experiments, under review.
[29] J. Gao, B.H. Lim, X. Zhai, Y. Nie, N. Kedir, W. Chen* (2021). Transverse loading on single fibers by using blunt indenters and the failure visualization, under review.
[28] J. Gao, N. Kedir, J. Hernandez, F. Zhou, J.T. Tsai, T.N., Tallman, M.B. Guk Jun, W. Chen* (2021). Dynamic failure of composite strips under different projectiles by reverse ballistic impact, under review.
[27] J. Gao, N. Kedir, J.A. Hernandez, J. Gao, T. Horn, Garam K., K. Fezzaa, T.N. Tallman, G. Palmese, R. Sterkenburg, W. Chen* (2021). Dynamic fracture of glass fiber-reinforced ductile polymer matrix composites and the loading rate effect, under review,
[26] J. Gao*, K. Fezzaa, W. Chen (2021). Multiscale dynamic experiments on fiber-reinforced composites with damage assessment using high-speed synchrotron X-ray phase-contrast imaging, under review.
[25] J. Gao, N. Kedir, W. Chen* (2021). Characterization of failure of single carbon nanotube fibers under extreme transverse loading, under review.
[24] X. Zhang, J. Gao, D. O’Brien, W. Chen, S. Ghosh* (2021), Parametrically homogenized continuum damage mechanics (PHCDM) models for analyzing composite structures, Composites Part B: Engineering, 228, 109409.
[23] N. Kedir, J. Hernandez, B.H. Lim, J. Gao, X. Zhai, Y. Nie, T.N. Tallman, W. Chen* (2021). Time dependent response of carbon fiber reinforced plastic (CFRP) to irradiation by a short pulse near-infrared (NIR) laser, Journal of Laser Applications, 33, 042034.
[22] J.T. Tadevich, N.D. Bhagat, B.H. Lim, J. Gao, W. Chen, G.A. Merrell* (2021). Power-optimizing repair distal biceps rupture: stronger and safer, Journal of Hand Surgery, 3 (5), 266-271.
[21] J. Gao, N. Kedir, C. Kirk, J. Hernandez, J. Wang, S. Paulson, X. Zhai, T. Horn, G. Kim, K. Fezzaa, F. De Carlo, P.D. Shevchenko, T.N. Tallman, R. Sterkenburg, W. Chen* (2021). High-speed synchrotron X-ray phase-contrast imaging for evaluating microscale damage mechanisms and tracking cracking behaviors inside cross-ply GFRCs, Composites Science and Technology, 210, 108814.
[20] J. Gao, Z. Guo, J. Hernandez, F. Zhou, Y. Nie, J. Gao, B.H. Lim, N. Kedir, X. Zhai, J. Wang, J.T. Tsai, F. De Carlo, P.D. Shevchenko, T.N., Tallman, M.B. Guk Jun, G.R. Palmese, W. Chen* (2021). Transverse impact by RCCs on S-Glass and Kevlar® FRC strips, Composites Part A: Applied Science and Manufacturing, 146, 106425.
[19] N. Kedir, E. Garcia, C. Kirk, J. Gao, Z. Guo, X. Zhai, T. Sun, K. Fezzaa, S. Sampath, W. Chen* (2021). Impact damage of narrow silicon carbide (SiC) ceramics with and without environmental barrier coatings (EBCs) by various foreign object debris (FOD) simulants, Surface and Coatings Technology, 407, 126779.
[18] J. Gao, N. Kedir, C. Kirk, J. Hernandez, J. Wang, S. Paulson, X. Zhai, T. Horn, G. Kim, J. Gao, K. Fezzaa, F. De Carlo, P. Shevchenko, T.N. Tallman, R. Sterkenburg, G.R. Palmese, W. Chen* (2021). Real-time damage characterization for GFRCs using high-speed synchrotron X-ray phase contrast imaging, Composites Part B: Engineering, 207, 108565.
[17] J. Gao, C. Kirk, N. Kedir, S. Paulson, J. Hernandez, J. Gao, X. Zhai, J. Wang, T. Horn, G. Kim, F. De Carlo, P. Shevchenko, T.N. Tallman, G.R. Palmese, R. Sterkenburg, W. Chen* (2021). A method for characterization of multiple dynamic constitutive parameters of FRCs, Composites Science and Technology, 203, 108607.
[16] J. Gao, B.H. Lim, X. Zhai, Y. Nie, N. Kedir, W. Chen* (2020). Failure behaviors of single high-performance fibers under transverse dynamic cut, International Journal of Impact Engineering, 144, 103660.
[15] N. Kedir, E. Garcia, C. Kirk, Z. Guo, J. Gao, X. Zhai, T. Sun, K. Fezzaa, S. Sampath, W. Chen* (2020). In situ characterization of foreign object damage (FOD) in environmental‐barrier‐coated silicon carbide (SiC) ceramic, Journal of the American Ceramic Society, 103(8): 4586-4601.
[14] D. Chen, N. Narayanan, E. Federici, Z. Yang, X. Zuo, J. Gao, F. Fang, M. Deng, O.H. Campanella, O.G. Jones* (2020). Electrospinning Induced Orientation of Protein Fibrils, Biomacromolecules, 21(7): 2772-2785.
[13] X. Zhai, Y. Nie, J. Gao, N. Kedir, B. Claus, T. Sun, K. Fezzaa, W. Chen* (2020). The effect of loading direction on the fracture behaviors of cortical bone at a dynamic loading rate, Journal of the Mechanics and Physics of Solids, 142, 104015.
[12] J. Gao, Y. Nie, B.H. Lim, X. Zhai, N. Kedir, W. Chen* (2020). In-situ observation of cutting-induced failure processes of single high-performance fibers inside a SEM, Composites Part A: Applied Science and Manufacturing, 131, 105767.
[11] Y. Nie, B. Claus, J. Gao, X. Zhai, N. Kedir, J. Chu, T. Sun, K. Fezzaa, W. Chen* (2020). In Situ Observation of Adiabatic Shear Band Formation in Aluminum Alloys, Experimental Mechanics, 60(2): 153-163.
[10] X. Zhai, J. Gao, Y. Nie, Z. Guo, N. Kedir, B. Claus, T. Sun, K. Fezzaa, X. Xiao, W. Chen* (2019). Real-time visualization of dynamic fractures in porcine bones and the loading-rate effect on their fracture toughness, Journal of the Mechanics and Physics of Solids, 131: 358-371.
[9] X. Zhai, J. Gao, H. Liao, C. Kirk, Y.A. Balogun, W. Chen* (2019). Mechanical behaviors of auxetic polyurethane foam at quasi-static, intermediate and high strain rates, International Journal of Impact Engineering, 129: 112-118.
[8] J. Gao*, Y. Nie, B.H. Lim, N. Kedir, W. Chen (2019). A microscopic experimental method transversely loading on single high-performance fibers, Experimental Mechanics, 59(5): 669-679.
[7] X. Zhai, Z. Guo, J. Gao, N. Kedir, Y. Nie, B. Claus, T. Sun, X. Xiao, K. Fezzaa, W. Chen* (2019). High-speed X-ray visualization of dynamic crack initiation and propagation in bone, Acta Biomaterialia, 90: 278-286.
[6] B.H. Lim, J.M. Chu, J. Gao, B. Claus, Y. Nie, W. Chen* (2019). The effect of projectile nose shape on the critical velocity of high-performance yarn, Fibers, 7(4): 29.
[5] J. Gao*, P. Huang, W. Yao (2017). Analytical and numerical study of temperature stress in the bi-modulus thick cylinder, Structural Engineering and Mechanics: An International Journal, 64(1): 81-92.
[4] J. Gao, W. Yao* (2017). Thermal stress analysis for bi-modulus foundation beam under nonlinear temperature difference, International Journal of Computational Methods, 14(01): 1750024.
[3] J. Gao, W. Yao*, J. Liu (2017). Temperature stress analysis for bi-modulus beam placed on Winkler foundation, Applied Mathematics and Mechanics-English Edition, 38(7): 921-934.
[2] J. Gao, W. Yao*, Y. Ma (2016). Analytical and numerical study of graphite IG110 parts in advanced reactor under high temperature and irradiation, Nuclear Engineering and Design, 305: 421-432.
[1] W. Yao*, J. Ma, J. Gao, Y. Qiu (2015). Nonlinear large deflection buckling analysis of compression rod with different moduli, Structural Engineering and Mechanics: An International Journal, 54(5): 855-875.
