期刊论文

当前位置:首页  研究成果  期刊论文

2018年

作者: 访问量:439时间:2021-04-04
  1. H. Zhu, X. Yang, G. M. Genin, T. J. Lu, F. Xu, and M. Lin, ‘The relationship between thiol-acrylate photopolymerization kinetics and hydrogel mechanics: An improved model incorporating photobleaching and thiol-Michael addition’, Journal of the mechanical behavior of biomedical materials, vol. 88, pp. 160–169, 2018.pdf

  2. Z. Zhao, B. Han, X. Wang, Q. Zhang, and T. J. Lu, ‘Out-of-plane compression of Ti-6Al-4V sandwich panels with corrugated channel cores’, Materials & Design, vol. 137, pp. 463–472, 2018.pdf

  3. J. Zhao, P. Huang, K. W. Xu, F. Wang, and T. J. Lu, ‘Unusual annealing effects on hardness and strain rate sensitivity of nanocrystalline Nb’, Thin Solid Films, vol. 645, pp. 146–153, 2018.pdf

  4. J. Zhao, P. Huang, K. W. Xu, F. Wang, and T. J. Lu, ‘Indentation size and loading strain rate dependent creep deformation of nanocrystalline Mo’, Thin Solid Films, vol. 653, pp. 365–370, 2018.pdf

  5. G. Zhao et al., ‘Reduced graphene oxide functionalized nanofibrous silk fibroin matrices for engineering excitable tissues’, NPG Asia Materials, vol. 10, no. 10, p. 982, 2018.pdf

  6. W. Zhang et al., ‘Engineering ellipsoidal cap-like hydrogel particles as building blocks or sacrificial templates for three-dimensional cell culture’, Biomaterials science, vol. 6, no. 4, pp. 885–892, 2018.pdf

  7. C. Ye, X. Liu, F. Xin, and T. J. Lu, ‘Influence of hole shape on sound absorption of underwater anechoic layers’, Journal of Sound and Vibration, vol. 426, pp. 54–74, 2018.pdf

  8. X. Yang, Y. Li, L. Zhang, L. Jin, W. Hu, and T. J. Lu, ‘Thermal and Fluid Transport in Micro-Open-Cell Metal Foams: Effect of Node Size’, Journal of Heat Transfer, vol. 140, no. 1, p. 014502, 2018.pdf

  9. X. Yang et al., ‘Comparison of direct numerical simulation with volume-averaged method on composite phase change materials for thermal energy storage’, Applied energy, vol. 229, pp. 700–714, 2018.pdf

  10. L. L. Yan, Z. Y. Zhao, B. Han, T. J. Lu, and B. H. Lu, ‘Tube enhanced foam: A novel way for aluminum foam enhancement’, Materials Letters, vol. 227, pp. 70–73, 2018.pdf

  11. L. L. Yan, B. Yu, B. Han, Q. C. Zhang, T. J. Lu, and B. H. Lu, ‘Effects of aluminum foam filling on the low-velocity impact response of sandwich panels with corrugated cores’, Journal of Sandwich Structures & Materials, p. 1099636218776585, 2018.

  12. F. Xin and T. J. Lu, ‘Modulation of acoustomechanical instability and bifurcation behavior of soft materials’, Scientific reports, vol. 8, no. 1, p. 16661, 2018.pdf

  13. F. Xin and T. J. Lu, ‘Acousto-thermo-mechanical deformation of hydrogels coupled with chemical diffusion’, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 474, no. 2217, p. 20180293, 2018.pdf

  14. X. Z. Wei, Q. Zhou, K. W. Xu, P. Huang, F. Wang, and T. J. Lu, ‘Enhanced hardness via interface alloying in nanoscale Cu/Al multilayers’, Materials Science and Engineering: A, vol. 726, pp. 274–281, 2018.pdf

  15. X. Wang et al., ‘Magnetic-responsive Fe3O4 nanoparticle-impregnated cellulose paper actuators’, Extreme Mechanics Letters, vol. 25, pp. 53–59, 2018.pdf

  16. P.-B. Su et al., ‘Axial compressive collapse of ultralight corrugated sandwich cylindrical shells’, Materials & Design, vol. 160, pp. 325–337, 2018.pdf

  17. S. Song, X. Yang, F. Xin, and T. J. Lu, ‘Modeling of surface roughness effects on Stokes flow in circular pipes’, Physics of Fluids, vol. 30, no. 2, p. 023604, 2018.pdf

  18. M. Shi, S. Feng, X. Zhang, C. Ji, F. Xu, and T. J. Lu, ‘Droplet based vitrification for cell aggregates: Numerical analysis’, Journal of the mechanical behavior of biomedical materials, vol. 82, pp. 383–393, 2018.pdf

  19. S. Ren et al., ‘Tunable acoustic absorbers with periodical micro-perforations having varying pore shapes’, EPL (Europhysics Letters), vol. 120, no. 4, p. 44001, 2018.pdf

  20. H. Qing et al., ‘Heterostructured Silk-Nanofiber-Reduced Graphene Oxide Composite Scaffold for SH-SY5Y Cell Alignment and Differentiation’, ACS applied materials & interfaces, vol. 10, no. 45, pp. 39228–39237, 2018.pdf

  21. N. Manuchehrabadi et al., ‘Ultrarapid Inductive Rewarming of Vitrified Biomaterials with Thin Metal Forms’, Annals of Biomedical Engineering, pp. 1–13, 2018.pdf

  22. N. Manuchehrabadi et al., ‘Metal foam based rewarming of vitrified systems’, Cryobiology, vol. 81, p. 231, 2018.pdf

  23. Y. Ma et al., ‘3D Spatiotemporal Mechanical Microenvironment: A Hydrogel‐Based Platform for Guiding Stem Cell Fate’, Advanced Materials, vol. 30, no. 49, p. 1705911, 2018.pdf

  24. P. Lv, J. Yu, X. Xu, T. Lu, and F. Xu, ‘Eriodictyol inhibits high glucose‐induced oxidative stress and inflammation in retinal ganglial cells’, Journal of cellular biochemistry, 2018.pdf

  25. H. Liu, M. Li, C. Ouyang, T. J. Lu, F. Li, and F. Xu, ‘Hydrogel Electronics: Biofriendly, Stretchable, and Reusable Hydrogel Electronics as Wearable Force Sensors (Small 36/2018)’, Small, vol. 14, no. 36, p. 1870166, 2018.pdf

  26. H. Liu, M. Li, C. Ouyang, T. J. Lu, F. Li, and F. Xu, ‘Biofriendly, Stretchable, and Reusable Hydrogel Electronics as Wearable Force Sensors’, Small, vol. 14, no. 36, p. 1801711, 2018.pdf

  27. H. Liu et al., ‘Magnetic steering of liquid metal mobiles’, Soft matter, vol. 14, no. 17, pp. 3236–3245, 2018.pdf

  28. Y. Li et al., ‘Non-contact tensile viscoelastic characterization of microscale biological materials’, Acta Mechanica Sinica, vol. 34, no. 3, pp. 589–599, 2018.pdf

  29. Y. Li et al., ‘On the role of weak interface in crack blunting process in nanoscale layered composites’, Applied Surface Science, vol. 433, pp. 957–962, 2018.pdf

  30. L. Li, Z. Zhao, R. Zhang, B. Han, Q. Zhang, and T. J. Lu, ‘Dual-level stress plateaus in honeycombs subjected to impact loading: perspectives from bucklewaves, buckling and cell-wall progressive folding’, Acta Mechanica Sinica, pp. 1–8, 2018.pdf

  31. L. Li et al., ‘Shock loading simulation using density-graded metallic foam projectiles’, Materials & Design, p. 107546, 2018.pdf

  32. F.-H. Li, B. Han, Q.-C. Zhang, F. Jin, and T. J. Lu, ‘Buckling of a standing corrugated sandwich plate subjected to body force and terminal load’, Thin-Walled Structures, vol. 127, pp. 688–699, 2018.pdf

  33. B. Jin et al., ‘Lateral flow aptamer assay integrated smartphone-based portable device for simultaneous detection of multiple targets using upconversion nanoparticles’, Sensors and Actuators B: Chemical, vol. 276, pp. 48–56, 2018.pdf

  34. C. Ji et al., ‘The protective effects of acupoint gel embedding on rats with myocardial ischemia-reperfusion injury’, Life sciences, vol. 211, pp. 51–62, 2018.pdf

  35. B. Han et al., ‘Creep of closed-cell aluminum foams: Effects of imperfections and predictive modeling’, Materials & Design, vol. 156, pp. 229–241, 2018.pdf

  36. B. Han et al., ‘A refined quasi-3D zigzag beam theory for free vibration and stability analysis of multilayered composite beams subjected to thermomechanical loading’, Composite Structures, vol. 204, pp. 620–633, 2018.pdf

  37. S. Feng, M. Shi, H. Yan, S. Sun, F. Li, and T. J. Lu, ‘Natural convection in a cross-fin heat sink’, Applied Thermal Engineering, vol. 132, pp. 30–37, 2018.pdf

  38. S. Feng, F. Li, F. Zhang, and T. J. Lu, ‘Natural convection in metal foam heat sinks with open slots’, Experimental Thermal and Fluid Science, vol. 91, pp. 354–362, 2018.pdf

  39. Y. Dong et al., ‘Engineering the Cell Microenvironment Using Novel Photoresponsive Hydrogels’, ACS applied materials & interfaces, vol. 10, no. 15, pp. 12374–12389, 2018.pdf

  40. Y. Cui, Y. Shibutani, P. Huang, F. Wang, K. Xu, and T. Lu, ‘Interface-Related Shear Banding Deformation of Amorphous/Crystalline CuZr/Cu Nanolaminates by Molecular Dynamics Simulations’, Materials transactions, vol. 59, no. 2, pp. 230–236, 2018.pdf 

  41. X. Cui et al., ‘In vitro diagnosis of DNA methylation biomarkers with digital PCR in breast tumors’, Analyst, 2018.pdf

  42. X. Chen et al., ‘The elastic fields of a compressible liquid inclusion’, Extreme Mechanics Letters, 2018.pdf

  43. X. Cai, J. Yang, G. Hu, and T. Lu, ‘Sound absorption by acoustic microlattice with optimized pore configuration’, The Journal of the Acoustical Society of America, vol. 144, no. 2, pp. EL138–EL143, 2018.pdf

  44. 张俊, 陈卫华, 任树伟, 辛锋先, 陈天宁, and 卢天健, ‘高温环境下梯度多孔金属纤维的吸声性能及优化设计’, 西安交通大学学报, vol. 52, no. 1, pp. 143–150, 2018.pdf

  45. 张丰辉, 唐宇帆, 辛锋先, and 卢天健, ‘微穿孔蜂窝-波纹复合声学超材料吸声行为’, 物理学报, vol. 67, no. 23, pp. 234302–234302, 2018.pdf

  46. 徐志敏, 宋思远, 辛锋先, 杨肖虎, and 卢天健, ‘Reynolds 数下粗糙圆管中黏性流场的理论解.’, Applied Mathematics & Mechanics (1000-0887), vol. 39, no. 2, 2018.

  47. 徐峰, 张晓慧, 鲍雪娇, 赵国旭, 刘付生, 黄国友, 李昱辉, and 卢天健, ‘基于先进生物材料的心肌细胞力--电微环境体外构建’, 力学进展, vol. 48, pp. 201807–201807, 2018.pdf

下一页:Constitutive laws

地址:江苏省南京市秦淮区御道街 29 号 邮政编码: 210016

Copyright 2021 多功能轻量化材料与结构工信部重点实验室保留所有权利